#DESKCNC 2.0.1 SOFTWARE#

You will need a DeskCNC software build later than the above date. When i press home second,third or more time the rapid to the earlier position sometimes wont take place and i end like intended on absylute x.5 y.5 z.5 The same way it does the other axis and i am not ending the first procedure at absylute x.5 y.5 z.5 like i thinke it should. Moves second time with F100 to x-home switch, rapids again back to x40 and then shows x0.5 in coordinate display. Move with script above x is starting at x40 y40 z-10 thenР”Р‡irst x moves with F400 to x-home switch then rapids back to x40 then G30 Z.5 F100 (Re-Home the Z Axis at a slower feedrate and offset) G30 Z.5 F400 (Home the Z Axis at a fast feedrate and offset by 0.5) G30 Y.5 F100 (Re-Home the Y Axis at a slower feedrate and offset) G30 Y.5 F400 (Home the Y Axis at a fast feedrate and offset by 0.5) G30 X.5 F100 (Re-Home the X Axis at a slower feedrate and offset) G30 X.5 F400 (Home the X Axis at a fast feedrate and offset by 0.5) Is this intended to work with version 2.0.1.5 because New tutorials/documentation are now posted at the following links: If you enter M30 X-.5 Y-.5 Z-.5, the machine will travel to the switches, zero out the machine coordinates and move to the X=-.5, Y=-.5, Z=-.5 position.

The machine should rapid to the switches and set machine coordinates to 0.0 in X and Y and Z. Restart the controller and make sure it jogs OK. Under Setup-Machine Setup-Homing Scripts, click the Home All button and clear any text from the screen. Here is the method that is presently working for me: I have uninstalled that version and installed version 2.0.0.86 and used the same machine setup and the simple home works just fine. Left clicking on the home button does nothing. If not,what version of DeskCNC software are you running? Look under help-About. If you can jog your machine, left-click the home button on your screen? Does that work? Also my limits are connected,but it won't let me even home using limits. my home switches are connected to x-y-z pins on one side of the switch and to ground pin on the other side of the switch. You do not need to use scripts to do simple homing. It will work in conjunction with premeasured tools or real time tool setter, like the TP-100 DeskCNC probe/toolsettter. One of it's intended purpose is to permit mid program tool breakage replacement and recovery. We have not yet documented the home script function. Also could someone explain the home script. If you want to use N/O home switches, connect them in parallel to the lim terminal and set it for N/O. Home switches connected to the X-Y-Z-A home pins must be N/C. Have nc switches on all axis for limits and no switches on all axis for home.

Deskcnc 2.0.1